OpenClaw

bambu

Control Bambu Lab 3D printers (H2D, X1C, P1S, A1) via CLI. Print management, AMS filament control, temperature, fans, lights, calibration, file management, and live monitoring. Use when operating a 3D printer, starting prints, monitoring progress, managing filaments, or troubleshooting printer issues.

g9pedro0 来源安装数☆ 0 仓库 Stars

查看来源 ↗安装与使用 SKILL.md ↗

安装与使用

请根据来源仓库和你的 AI 工具说明安装此技能。先阅读技能文件和依赖要求，再添加到工作流。

SkillHub CLI

skillhub install g9pedro/bambu

打开来源仓库，查看说明和兼容环境后，按来源提供的命令或步骤安装。

将来源链接提供给你的 Agent，让它先读取说明、核对依赖，并向你说明将执行的安装步骤。

查看来源 ↗使用指南

技能说明

Bambu Lab 3D Printer Control

Full control of Bambu Lab printers via MQTT + FTP. Agent-agnostic, local-only, no cloud.

Prerequisites

Printer must be in Developer Mode (Settings → LAN Only → Enable Developer Mode)
Need: IP address, serial number, LAN access code (from printer touchscreen)
CLI: @versatly/bambu installed globally (npm i -g @versatly/bambu)

Setup

bambu setup <ip> <serial> <access_code>
bambu ping  # verify connection

Config stored at ~/.bambu/config.json.

Progressive Loading Guide

Load ONLY what you need for the current task:

Level 1: Status Check (most common)

bambu status          # full status overview
bambu status --json   # programmatic access
bambu temp            # just temperatures  
bambu ams             # just AMS/filament info
bambu errors          # any active errors

Level 2: Print Operations

# Start a print from SD card
bambu print "filename.3mf"

# Upload and print in one step
bambu job upload-and-print ./my-part.3mf

# Control running print
bambu pause
bambu resume  
bambu stop

# Live monitoring (streams progress)
bambu watch

Level 3: Hardware Control

# Temperature
bambu heat nozzle:220 bed:60
bambu cooldown

# Fans (0-100%)
bambu fan part 80
bambu fan aux 50
bambu fan chamber 30

# Lights
bambu light on
bambu light off

# Movement
bambu home
bambu move x:10 y:20 z:5
bambu gcode "G28"

Level 4: AMS Filament Management

# Check what's loaded
bambu ams

# Load specific tray (0-3)
bambu load 0
bambu load 2

# Unload current filament
bambu unload

Level 5: File Management & Calibration

# SD card files
bambu files
bambu upload ./part.3mf
bambu delete old-print.3mf

# Calibration
bambu calibrate bed
bambu calibrate vibration
bambu calibrate flow
bambu calibrate all

Common Agent Workflows

"Print this file"

bambu job upload-and-print ./part.3mf
bambu watch  # monitor until done

"Check if printe...

来源信息

Source: github
Repository: openclaw/skills
Path: skills/g9pedro/bambu
Version: —
Commit: 296bb2fd8e8116f4898097c8a6cabbd25f66f79d
分类来源: rules
状态: active
可见性: public

这些信息来自收录时的来源分析，可能滞后；使用前请核对最新来源文件。

来源内容

SKILL.md

# Bambu Lab 3D Printer Control

Full control of Bambu Lab printers via MQTT + FTP. Agent-agnostic, local-only, no cloud.

## Prerequisites

- Printer must be in **Developer Mode** (Settings → LAN Only → Enable Developer Mode)
- Need: IP address, serial number, LAN access code (from printer touchscreen)
- CLI: `@versatly/bambu` installed globally (`npm i -g @versatly/bambu`)

## Setup

```bash
bambu setup <ip> <serial> <access_code>
bambu ping  # verify connection
```

Config stored at `~/.bambu/config.json`.

## Progressive Loading Guide

Load ONLY what you need for the current task:

### Level 1: Status Check (most common)
```bash
bambu status          # full status overview
bambu status --json   # programmatic access
bambu temp            # just temperatures  
bambu ams             # just AMS/filament info
bambu errors          # any active errors
```

### Level 2: Print Operations
```bash
# Start a print from SD card
bambu print "filename.3mf"

# Upload and print in one step
bambu job upload-and-print ./my-part.3mf

# Control running print
bambu pause
bambu resume  
bambu stop

# Live monitoring (streams progress)
bambu watch
```

### Level 3: Hardware Control
```bash
# Temperature
bambu heat nozzle:220 bed:60
bambu cooldown

# Fans (0-100%)
bambu fan part 80
bambu fan aux 50
bambu fan chamber 30

# Lights
bambu light on
bambu light off

# Movement
bambu home
bambu move x:10 y:20 z:5
bambu gcode "G28"
```

### Level 4: AMS Filament Management
```bash
# Check what's loaded
bambu ams

# Load specific tray (0-3)
bambu load 0
bambu load 2

# Unload current filament
bambu unload
```

### Level 5: File Management & Calibration
```bash
# SD card files
bambu files
bambu upload ./part.3mf
bambu delete old-print.3mf

# Calibration
bambu calibrate bed
bambu calibrate vibration
bambu calibrate flow
bambu calibrate all
```

## Common Agent Workflows

### "Print this file"
```bash
bambu job upload-and-print ./part.3mf
bambu watch  # monitor until done
```

### "Check if printe...

搜索