OpenClaw

hilink-lte

Control Huawei HiLink USB LTE modems (E3372, E8372, etc.) via REST API. Send/receive SMS, check signal strength, manage SIM PIN, query prepaid balance, and monitor connection status. Use when sending or reading SMS messages, checking LTE signal/status, entering SIM PIN, querying mobile balance (USSD), or managing a HiLink USB modem.

and0r0 来源安装数☆ 0 仓库 Stars

查看来源 ↗安装与使用 SKILL.md ↗

安装与使用

请根据来源仓库和你的 AI 工具说明安装此技能。先阅读技能文件和依赖要求，再添加到工作流。

SkillHub CLI

skillhub install and0r/hilink-lte

打开来源仓库，查看说明和兼容环境后，按来源提供的命令或步骤安装。

将来源链接提供给你的 Agent，让它先读取说明、核对依赖，并向你说明将执行的安装步骤。

查看来源 ↗使用指南

技能说明

HiLink LTE Modem

Control Huawei HiLink USB LTE modems via their local REST API.

Setup

The modem must be in HiLink mode (not stick/serial mode) and accessible via HTTP.

Config

Set gateway IP in ~/.config/hilink/config:

HILINK_GATEWAY=192.168.200.1

Or pass via environment: export HILINK_GATEWAY=192.168.200.1

Default: 192.168.200.1

Network Requirements

The LTE USB interface needs an IP on the modem's subnet (e.g., 192.168.200.x). Configure as static IP with no gateway and no DNS to avoid routing conflicts:

# /etc/network/interfaces.d/lte
allow-hotplug lte0
iface lte0 inet static
    address 192.168.200.100/24

Critical: Never let the LTE interface set a default route or DNS — it will override your LAN connection. Use nogateway and nohook resolv.conf in dhcpcd, or a static config with no gateway line.

Persistent Interface Name

USB network interfaces get random names on each boot. Create a udev rule for a stable name:

# Find MAC address
cat /sys/class/net/enx*/address

# Create udev rule
echo 'SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="xx:xx:xx:xx:xx:xx", NAME="lte0"' \
  | sudo tee /etc/udev/rules.d/70-lte-modem.rules

CLI Usage

# SMS
scripts/hilink.sh sms send "+41791234567" "Hello!"
scripts/hilink.sh sms list
scripts/hilink.sh sms read 40001
scripts/hilink.sh sms delete 40001

# Status & Signal
scripts/hilink.sh status
scripts/hilink.sh signal

# SIM PIN
scripts/hilink.sh pin enter 1234
scripts/hilink.sh pin disable 1234
scripts/hilink.sh pin status

# Prepaid Balance (USSD)
scripts/hilink.sh balance

# Connection info
scripts/hilink.sh info

API Overview

All HiLink API calls require a session token + CSRF token pair:

# Get tokens
curl -s http://GATEWAY/api/webserver/SesTokInfo
# Returns: <SesInfo>cookie</SesInfo><TokInfo>csrf_token</TokInfo>

# Use in requests
curl -X POST http://GATEWAY/api/endpoint \
  -H "Cookie: <SesInfo value>" \
  -H "__Request...

来源信息

Source: github
Repository: openclaw/skills
Path: skills/and0r/hilink-lte
Version: —
Commit: 953295fa267c81ad91489bc2e44fb7ab3600f771
分类来源: rules
状态: active
可见性: public

这些信息来自收录时的来源分析，可能滞后；使用前请核对最新来源文件。

来源内容

SKILL.md

# HiLink LTE Modem

Control Huawei HiLink USB LTE modems via their local REST API.

## Setup

The modem must be in **HiLink mode** (not stick/serial mode) and accessible via HTTP.

### Config

Set gateway IP in `~/.config/hilink/config`:
```bash
HILINK_GATEWAY=192.168.200.1
```

Or pass via environment: `export HILINK_GATEWAY=192.168.200.1`

Default: `192.168.200.1`

### Network Requirements

The LTE USB interface needs an IP on the modem's subnet (e.g., 192.168.200.x). Configure as **static IP with no gateway and no DNS** to avoid routing conflicts:

```
# /etc/network/interfaces.d/lte
allow-hotplug lte0
iface lte0 inet static
    address 192.168.200.100/24
```

**Critical:** Never let the LTE interface set a default route or DNS — it will override your LAN connection. Use `nogateway` and `nohook resolv.conf` in dhcpcd, or a static config with no gateway line.

### Persistent Interface Name

USB network interfaces get random names on each boot. Create a udev rule for a stable name:

```bash
# Find MAC address
cat /sys/class/net/enx*/address

# Create udev rule
echo 'SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="xx:xx:xx:xx:xx:xx", NAME="lte0"' \
  | sudo tee /etc/udev/rules.d/70-lte-modem.rules
```

## CLI Usage

```bash
# SMS
scripts/hilink.sh sms send "+41791234567" "Hello!"
scripts/hilink.sh sms list
scripts/hilink.sh sms read 40001
scripts/hilink.sh sms delete 40001

# Status & Signal
scripts/hilink.sh status
scripts/hilink.sh signal

# SIM PIN
scripts/hilink.sh pin enter 1234
scripts/hilink.sh pin disable 1234
scripts/hilink.sh pin status

# Prepaid Balance (USSD)
scripts/hilink.sh balance

# Connection info
scripts/hilink.sh info
```

## API Overview

All HiLink API calls require a session token + CSRF token pair:

```bash
# Get tokens
curl -s http://GATEWAY/api/webserver/SesTokInfo
# Returns: <SesInfo>cookie</SesInfo><TokInfo>csrf_token</TokInfo>

# Use in requests
curl -X POST http://GATEWAY/api/endpoint \
  -H "Cookie: <SesInfo value>" \
  -H "__Request...

搜索