OpenClaw

starlink

Control Starlink dish via local gRPC API. Get status, list WiFi clients, run speed tests, stow/unstow dish, reboot, and get GPS location. Use when the user asks about Starlink, internet status, connected devices, or satellite connectivity.

danfedick0 来源安装数☆ 0 仓库 Starsv1.0.0

查看来源 ↗安装与使用 SKILL.md ↗

安装与使用

请根据来源仓库和你的 AI 工具说明安装此技能。先阅读技能文件和依赖要求，再添加到工作流。

SkillHub CLI

skillhub install danfedick/starlink

打开来源仓库，查看说明和兼容环境后，按来源提供的命令或步骤安装。

将来源链接提供给你的 Agent，让它先读取说明、核对依赖，并向你说明将执行的安装步骤。

查看来源 ↗使用指南

技能说明

Starlink CLI

Control your Starlink dish from the command line via its local gRPC API at 192.168.100.1:9200.

Installation

cargo install --git https://github.com/danfedick/starlink-cli

Requires Rust and protoc (Protocol Buffers compiler).

Commands

Status

Get dish state, uptime, SNR, latency, throughput, obstructions:

starlink status
starlink status --json

WiFi Clients

List devices connected to the Starlink router:

starlink clients
starlink clients --json

Output includes: name, MAC, IP, signal strength, interface (2.4GHz/5GHz/ETH), connection time.

Speed Test

Run a speed test through the dish:

starlink speedtest
starlink speedtest --json

Returns download/upload Mbps and latency.

Stow/Unstow

Stow dish flat for transport or storage:

starlink stow           # stow
starlink stow --unstow  # unstow and resume

Reboot

Reboot the dish:

starlink reboot

Location

Get GPS coordinates (must be enabled in Starlink app → Settings → Advanced → Debug Data → "allow access on local network"):

starlink location
starlink location --json

Output Formats

Default: Human-readable colored output
--json: JSON for scripting/parsing

Example JSON parsing:

starlink status --json | jq '.latency_ms'
starlink clients --json | jq '.[] | .name'

Requirements

Connected to Starlink network
Dish reachable at 192.168.100.1:9200
For location: enable in Starlink app first

Troubleshooting

"Failed to connect to Starlink dish"

Verify you're on the Starlink WiFi or wired to the router
Check: ping 192.168.100.1
If using bypass mode with your own router, ensure 192.168.100.1 is still routable

Location returns empty

Enable in Starlink app: Settings → Advanced → Debug Data → "allow access on local network"

Limitations

Device pause/unpause is NOT available (cloud-only feature via Starlink app)
Only works on local ne...

来源信息

Source: github
Repository: openclaw/skills
Path: skills/danfedick/starlink
Version: 1.0.0
Commit: efaa340270e12246c57a55ed8fe7dacbe57e4111
分类来源: rules
状态: active
可见性: public

这些信息来自收录时的来源分析，可能滞后；使用前请核对最新来源文件。

来源内容

SKILL.md

# Starlink CLI

Control your Starlink dish from the command line via its local gRPC API at `192.168.100.1:9200`.

## Installation

```bash
cargo install --git https://github.com/danfedick/starlink-cli
```

Requires Rust and `protoc` (Protocol Buffers compiler).

## Commands

### Status
Get dish state, uptime, SNR, latency, throughput, obstructions:
```bash
starlink status
starlink status --json
```

### WiFi Clients
List devices connected to the Starlink router:
```bash
starlink clients
starlink clients --json
```

Output includes: name, MAC, IP, signal strength, interface (2.4GHz/5GHz/ETH), connection time.

### Speed Test
Run a speed test through the dish:
```bash
starlink speedtest
starlink speedtest --json
```

Returns download/upload Mbps and latency.

### Stow/Unstow
Stow dish flat for transport or storage:
```bash
starlink stow           # stow
starlink stow --unstow  # unstow and resume
```

### Reboot
Reboot the dish:
```bash
starlink reboot
```

### Location
Get GPS coordinates (must be enabled in Starlink app → Settings → Advanced → Debug Data → "allow access on local network"):
```bash
starlink location
starlink location --json
```

## Output Formats

- **Default**: Human-readable colored output
- **--json**: JSON for scripting/parsing

Example JSON parsing:
```bash
starlink status --json | jq '.latency_ms'
starlink clients --json | jq '.[] | .name'
```

## Requirements

- Connected to Starlink network
- Dish reachable at `192.168.100.1:9200`
- For location: enable in Starlink app first

## Troubleshooting

**"Failed to connect to Starlink dish"**
- Verify you're on the Starlink WiFi or wired to the router
- Check: `ping 192.168.100.1`
- If using bypass mode with your own router, ensure 192.168.100.1 is still routable

**Location returns empty**
- Enable in Starlink app: Settings → Advanced → Debug Data → "allow access on local network"

## Limitations

- Device pause/unpause is NOT available (cloud-only feature via Starlink app)
- Only works on local ne...

搜索